Page 1 of 1
WTB: ECU for G200w
Posted: Tue Dec 16, 2008 11:05 am
by hobo13b
Need an aftermarket ECU for my g200w. Was previously ran by a haltech and still has the loom so a haltech would great. A microtech would also be good as long as it was already mapped and tuned to a g200w or a g180w and had full loom.
Need one pretty urgently.
PM or email
bighayds_007@hotmail.com or call/txt 0424695669
Cheers
Posted: Tue Dec 16, 2008 4:47 pm
by IZU069
You might want to see about the Delco 808s - there were writeups on Poida's twincam forum (by Poida & RodeoBob).
I just returned from Adelaide with a G200W + EMS ECU (using 4ZE1 style optic CAS and twin-coils) but I have no info on it and am keen to use it myself. Eventually. (IE - maybe a loan/rental in the meantime?)
Posted: Tue Dec 16, 2008 8:48 pm
by IZU069
Update on my EMS. It's a 1999 version and therefore seems to predate laptop etc upgrades (hand-controller else a firmware update is needed; the latter isn't worth it).
It came off a what was apparently a standard Piazza G200W with Pacemaker extractors. It uses a cap&rotor-less Piazza dizzy (I-TEC) and fires 2 twin-fire coils. I have the extractors with O2 sensor and ignition parts (and the engine) and wiring.
PS - I have its 2 twin-output Mitsubishi coils.