Hey guys/gals after a few parts for my 77 TC gemini
Front Right 1/4 panel - Must be in VGC and no rust or dints and in the factory orange
Back Right Door - once again much be in the factory orange and in VGC
manual pedal box and accessories - Doing the manual conversion so going to need clutch cable atc...
Hand brake cable
Boss kit - not sure of the differences but pretty sure going to put some type of comfy momo wheel on it so...
Left hand side mirror - it's the older style, not even sure if mine came with one - is it needed for a road worthy
probs going to need to go to a wrecker for
some of these parts but thought i'd try my luck
thanks for all your help
nikson
WTB Few Parts for TC gemini (MELB)
-
Poida
- Technical Forums Admin
- Posts: 695
- Joined: Sun Aug 27, 2006 7:32 pm
- Location: NSW/Vic border
- Contact:
Finding the panels in "VGC and no rust or dints" is going to be a big ask to start with. Most of the Geminis in that age group will have some blemishes so you might be better to widen the scope a bit by accepting something that is in good condition but might need a repair. The need to get it in a particular colour is going to make it even harder.
Panel dents are easy enough to fix if they are only small supermarket type bumps and rust repairs can be tackled using rust repair panels that are available through numerous suppliers.
Paint isn't a real issue. You can get a litre of acrylic laquer colour matched and mixed up for about $40-45 from most Autobarn stores.
Where are you located? If you are willing to accept a few panels that could be used although they are unlikely to meet all your criteria, I can probably hunt out some worthwhile ones.
Panel dents are easy enough to fix if they are only small supermarket type bumps and rust repairs can be tackled using rust repair panels that are available through numerous suppliers.
Paint isn't a real issue. You can get a litre of acrylic laquer colour matched and mixed up for about $40-45 from most Autobarn stores.
Where are you located? If you are willing to accept a few panels that could be used although they are unlikely to meet all your criteria, I can probably hunt out some worthwhile ones.
.
.
I try to tackle one day at a time, but o̶f̶t̶e̶n̶ sometimes several days attack me at once.
.
.
I try to tackle one day at a time, but o̶f̶t̶e̶n̶ sometimes several days attack me at once.
.
yeah understand that was just trying my luck
With the paint idea, just didn't want a car with some orange panels and others blue or something..lol....
i am definately still interested in rear door as thats definatly going to be replaced for th RWC..
if you could send me some photo's of the panels would be muchly appreciated...and we'll work from there..
i am in camberwell, melb...so whether it's going to be worth while from NSW,VIC border..well see
thanks again and look forward to hear from you
With the paint idea, just didn't want a car with some orange panels and others blue or something..lol....
i am definately still interested in rear door as thats definatly going to be replaced for th RWC..
if you could send me some photo's of the panels would be muchly appreciated...and we'll work from there..
i am in camberwell, melb...so whether it's going to be worth while from NSW,VIC border..well see
thanks again and look forward to hear from you
-
Poida
- Technical Forums Admin
- Posts: 695
- Joined: Sun Aug 27, 2006 7:32 pm
- Location: NSW/Vic border
- Contact:
Ok, I'll start searching among my contacts. Colour isn't an issue as long as it isn't five different colours. Just paint any replacement panels in primer to get you started and they won't be able to pick on you.
.
.
I try to tackle one day at a time, but o̶f̶t̶e̶n̶ sometimes several days attack me at once.
.
.
I try to tackle one day at a time, but o̶f̶t̶e̶n̶ sometimes several days attack me at once.
.
Who is online
Users browsing this forum: No registered users and 25 guests