*** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
-
- Technical Forums Admin
- Posts: 287
- Joined: Mon May 21, 2007 8:10 pm
- Location: watching from heaven
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
I only have G200's that need rebuilds.. none are good running motors sorry.
How the hell should i know.. i only work here
-
- Member
- Posts: 6
- Joined: Mon Aug 22, 2011 12:08 pm
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
Ok, thanks anyway
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
hey, you wouldnt happen to have fuel hinges in good cond... i need 4 of them if u do what price and can u send to SA??? also a rear left brakelight for a TE sl/x price?
-
- Technical Forums Admin
- Posts: 287
- Joined: Mon May 21, 2007 8:10 pm
- Location: watching from heaven
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
No hinges , but can help with tail light. $25 + $15 post
How the hell should i know.. i only work here
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
no worries for that, i got the TE back today and after close look at the rust im just going to take the motor and minor other parts i need n scrap/sell the rest off, thanks heaps...
p.s. i got a mate looking for a starter motor for a 75 gemi, what price for one and postage still in SA plz
p.s. i got a mate looking for a starter motor for a 75 gemi, what price for one and postage still in SA plz
-
- Technical Forums Admin
- Posts: 287
- Joined: Mon May 21, 2007 8:10 pm
- Location: watching from heaven
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
you'd be better off trying to get one locally , postage would be about $25 due to weight.
How the hell should i know.. i only work here
-
- Isuzu Master
- Posts: 444
- Joined: Sat Apr 12, 2008 8:09 pm
- Location: Melbourne Australia
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
An any Isuzu RHS petrol starter should fit (Gemini, Rodeo, Jackaroo).
I use the 4ZE1 reduction starter motors (for LH starter G-U and G-W engines) but I don't know if that'll fit the Gem, though I think it will. (It won't fit Gems with LH starter DOHC (G-W) engines as it hits the exhaust - unless the Gemini diesel crossmember is used for "standard" G-W exhaust manifold & routing.)
The 4ZE1 (2.6L) reduction starters draws about 140A compared to ~240A standard - hence much more battery friendly. (And the reduction cranks ok at 6V!)
There is also an aftermarket "inline" reduction starter for the Gem for ~$200. It looks the same as a st'd Gem starter by is slightly smaller.
I use the 4ZE1 reduction starter motors (for LH starter G-U and G-W engines) but I don't know if that'll fit the Gem, though I think it will. (It won't fit Gems with LH starter DOHC (G-W) engines as it hits the exhaust - unless the Gemini diesel crossmember is used for "standard" G-W exhaust manifold & routing.)
The 4ZE1 (2.6L) reduction starters draws about 140A compared to ~240A standard - hence much more battery friendly. (And the reduction cranks ok at 6V!)
There is also an aftermarket "inline" reduction starter for the Gem for ~$200. It looks the same as a st'd Gem starter by is slightly smaller.
Isuzu means a lot to me
(Caveat: But I've never owned a Gemini)
(Caveat: But I've never owned a Gemini)
-
- New Member
- Posts: 3
- Joined: Wed Sep 05, 2012 2:26 pm
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
hey lok im after a tx early model master cylinder space plate, have you got one?
-
- New Member
- Posts: 1
- Joined: Wed Sep 12, 2012 9:39 pm
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
Looking for a rb Gemini driver side door trim linyl please!?!?
-
- Technical Forums Admin
- Posts: 287
- Joined: Mon May 21, 2007 8:10 pm
- Location: watching from heaven
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
zero RB's in the yard sorryfattymatty95 wrote:Looking for a rb Gemini driver side door trim linyl please!?!?
How the hell should i know.. i only work here
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
Hi mate
I'm after the following for td wagon 79 petrol.
Master cylinder and petrol flap and heater cover (curved metal piece)
And postage to 2325 cessnock nsw
Thanks
I'm after the following for td wagon 79 petrol.
Master cylinder and petrol flap and heater cover (curved metal piece)
And postage to 2325 cessnock nsw
Thanks
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
any luck finding a radio plastic bezel and the panel gauge cover with the digital clock in it?
-
- Technical Forums Admin
- Posts: 287
- Joined: Mon May 21, 2007 8:10 pm
- Location: watching from heaven
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
what colour?red888 wrote:any luck finding a radio plastic bezel and the panel gauge cover with the digital clock in it?
How the hell should i know.. i only work here
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
beige would do it
-
- Technical Forums Admin
- Posts: 287
- Joined: Mon May 21, 2007 8:10 pm
- Location: watching from heaven
- Contact:
Re: *** GEM CITY WRECKERS BRISBANE*** updated p1 05/11
the panel gauge colour is black , they never made a brown. The radio surround is only black as well.
Panel with clock $30 , radio surround $15 + post , unless your a brisbaninte and are able to pick up.
Panel with clock $30 , radio surround $15 + post , unless your a brisbaninte and are able to pick up.
How the hell should i know.. i only work here
Who is online
Users browsing this forum: No registered users and 12 guests